Use and Care Manual

Fig.18
Turn ON the electric power at the main fuse or circuit breaker box.
The slide switch on switch box sets direction of fan rotation. Select the desired direction of fan rotation.
Push the slide switch down for " Forward" and up for "Reverse".
Note: Wait for fan to stop before reversing the direction of blade rotation.
Install two pull chains and drops onto the pull chains located in the switch box and light kit.
The pull chain controls the fan speed as follows:
1 pull – High, 2 pull – Medium, 3 pull – Low, and 4 pull – Off.
To turn the light kit “ON” or “OFF”, pull the chain that is attached to the light kit.
Caution:
1. If you install a wall control for this fan, pull the pull chains to "high speed" of the fan motor and "on" of
the fan light.
2. Compatible wall switch model No.: Lutron SKU# S2-LFSQH-WH / Hunter SKU# 27183.
Forward
Reverse
Fan Speed
Pull Chain
Fan Light Pull Chain
Reverse Switch
Fig.17
Install pull
chains and
drops
Fig.15
Socket Ring
Glass Shade
Glass Holder
3-6W E26 A19 LED
Bulbs (included)
E26 A19 bulb Max. 60W
Fig.16
Attach the glass shades onto the glass
holders, secure them with socket rings.
Install LED bulbs (included).
See relamping label at socket area or packaging for
maximum wattage allowed.
Side Switch
Forward
Reverse
Fig.17a
PAGE: 7 / 9
231101