Installation Guide

Fig.21

Fig.22

PAGE: 8 / 9

Install the battery (9V, included) to the transmitter.

* Press "HI" button to turn on the fan at high speed.

* Press "MED" button to turn the fan in medium speed.

* Press "LOW" button to turn the fan in low speed.

* Press "FAN OFF" button to turn off the fan.

* Press "LIGHT ON /OFF" button to turn on or turn off the light.

* Press and hold the "DIMMER" button to dim or brighten lights to the desired level and

release, and the brightness level will be memorized.Turn on the light again, then fan

light will restore on of the brightness level which was dimmed last time.

* Press "DIMMER" button to change color temperature of fan light, there are total 5 levels color

changing from 2700K,3000K,3500K,4000K to 5000K.

Note:

This remote controller has memory function setting. The fan will operate at the same

speed and the fan light will stay at the same brightness as the last time the power supply

was turned off.

Fig.23

Turn ON the electric circuit at the main fuse or circuit breaker box.

F A N C O

200116