Installation Sheet
Install fan
light
Connect the blue wire from motor to the black wire from light kit
by wire connectors. And connect the white wire from motor to the
white wire from light kit by wire connectors. Remove three fix
screw from bottom
of
motor assembly (for later use). Secure the
light kit to motor assembly with previous three fix screw.
Attach the glass shade to the light kit by aligning
studs and slots, and turn it clockwise until it is
locked
in
place.
The slide switch
on
motor assembly sets direction
of
fan rotation.
Select the desired direction
offan
rotation. Push the slide switch
down for "Forward" and up for "Reverse".
Turn ON the electric circuit at the
main fuse
or
circuit breaker box.
Note:
Wait
for
fan
to
stop
before reversing
the
direction
of
blade rotation.
1!'-lllll!llr--===-------, Install the battery (9V, included) to the transmitter.
*Press
"HI" button to turn on the fan at high speed.
* Press "MED" button to turn the fan
in
medium speed.
* Press
"LOW' button to turn the fan
in
low speed. LIGHT
ON/OFF
FAN
OFF * Press "FAN OFF" button to turn
off
the fan.
* Press "LIGHT ON /OFF" button to turn on
or
turn off the light.
*Press
and hold the "DIMMER" button to dim or brighten lights to the desired level and
release, and the brightness level will be memorized. Turn on the light again, then fan light
will restore on
of
the brightness level which was dimmed last time.
Note:
1.This remote
controller
has memory function setting. The fan will operate at
the
same
speed and
the
fan
light
will
stay at
the
same brightness as
the
last
time
the power
supply
was turned off.
:===========~--'
2.Compatible wall
switch
model No.:Hunter/27182.
Transmitter
l1fim
:
~
wa11
........
U
1\iU:;
/
s"ew
Install the transmitter wall bracket
in
wall by two screws
and hang transmitter
in
it carefully.
PAGE
:
7/8
'!i~e_Ry4~~
180103