Manualshelf

Owner's Manual

ManualsBrandsVaxcel ManualsChandeliersVaxcel Lighting Lodge 6 Light Single Tier Chandelier with Fabric Shades - 22 Inches Wide
1
Nipp
l
e(-b)
Fixture Wire
Chain
Mounting Screw
Nipple(-a)
Fixture Grounding Wire
Collar
Top Loop
Canopy
Mounting Strap
Green Grounding Screw
Hex Nut
Wire Nut
Washer
Outlet Box
House Grounding Wire
Loop Lock
Loop Lock
Loop
Hex Nut
W
ashe
r
Decoration
Washer
Hex Nut
Shade
Harp
Candle Cover
Socket
Antler
Fixture
Coupling
1. Attach nipple(-a) to the mounting strap, then secure it
with a washer and hex nut.
2. Attach the mounting strap to the outlet box by using
two mounting screws.
3. Secure the top loop to nipple(-a).
4. Thread the fixture wire and fixture grounding wire through
the washer, hex nut, nipple(-b), decoration, washer, hex
nut and loop in order.
5. Thread nipple(-b) into the coupling, then secure it with a
washer and a hex nut.
6. Attach the decoration onto the fixture by inserting nipple(-b),
then secure it with a washer and hex nut.
7. Secure the loop onto nipple(-b).
8. Choose the length of the chain you need, then weave the
fixture wire and the fixture grounding wire through the chain,
collar and canopy.
9. Connect one end of the chain with the loop by using a
loop lock.
10. Connect the other end of the chain with the top loop by
using another loop lock.
11. Thread the fixture wire and fixture grounding wire through
the top loop, nipple(-a) and mounting strap.
12. Pull out the outlet wires and house grounding wire from
the outlet box. Make wire connections using the wire nuts:
---The smooth wire (marked) from the fixture to the black
wire from the power source.
---The ridged wire (unmarked) from the fixture to the white
wire from the power source.
---Attach the fixture grounding wire to the mounting strap
with the green grounding screw. Then connect it
to the house grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
13. Attach the canopy to the mounting strap by
inserting the top loop, then secure it with the
collar.
14. Attach the candle covers to the sockets, then attach
the harps of the shades onto the candle covers.
15. Install bulbs (not included). See relamping label at socket
area or packaging for maximum allowed wattage.
16. Turn on the power at the main fuse or circuit breaker box.
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THIS INSTRUCTION.
CH33003 / CH33006
070625

Summary of content (1 pages)