Installation Sheet

181206
B: 11"
A: 7-1/4"
Turn on the power at fuse or circuit box
:
Mounting Strap (A)
Mounting Screw (B) Wire Connector (C)
Mounting Ball (G)
Hex Nut (D)
Washer (E) Threaded Pipe (F)
G45 LED Bulb Max.4W (H)
8105LED
Glass Shade (I)
10080GS
Hand Screw (J)
6071MM
The following parts are available for re-order if damaged or missing.
Assembly Kit
6067MM (1SET)
6. Attach the LED bulb (H) into the glass shade (I) and screw it to the light head, then tighten the bulb (H) in place.
Caution: LED Lamp, Type A or G, E12 base, maximum 25W X 3
Incandescent Lamp, Type A or G, E12 base, maximum 60W X 3
Notes: LED Dimmable bulb to be compatible with most LED Dimmers, recommended Lutron:
MSCL-OP153MH, MACL-153MH, DVWCL-153PH, TGCL-153PH, SCL-153PH.
7. Follow step 5 & 6 of instructions of single light head installation for other two light heads.
8. Adjust the light heads to a desired position by using the swivel.
5-YEAR LIMITED WARRANTY:
All products are warranted to be free of defects in material and workmanship for five (5) years from date of
purchase. This warranty is limited to the correction of any such defect, or the replacement of any such defective
item(s), provided that: (a) we are properly notified and consent to return of the item(s) in question:(b) the item (s)
is / are returned with proof of purchase date; and (c) it is found upon inspection by us that the item (s) is / are defective
as noted above. This warranty does not cover labor costs, consequential damages, nor does it apply to any item(s) that
have been improperly installed, overloaded, altered, or otherwise abused by the customer, its agent(s) or employee(s).
Finishes are specially excluded from the terms of this warranty since they are subject to environmental maintenance
deemed beyond our control. Other than the described obligation, we assume no further liability with respect to the sale
or use of our products.We make no warranty, express or implied, and disclaim any warranty of merchantability or fitness
for a particular purpose.