Installation Guide

160628

Turn on the power at fuse or circuit box

Mounting Strap (A)

Decorative Cover (J)

Pine Cone (K)

5095PC

Small Pine Cone (L)

5091PC

Pine Needle (M)

5089PN

Washer (F)

Threaded Pipe (G)

Green Grounding (C)

Long Screw (D)

Mounting Screw (B)

Wire Nut (E)

Hex Nut (I)

Metal Pad (H)

A: 15-1/2"

B: 9"

4. Attach the ceiling pan to the mounting strap by inserting two long screw heads into the key holes. Rotate the ceiling

pan until it is locked into place, and then tighten the long screws to secure it. (See Fig.1)

5. Install three bulbs (not included). Check relamping label at socket area or packaging for maximum allowed wattage.

6. Secure the small pine cones and the pine needles onto the ceiling pan as shown in the diagram.

7. Thread the thread pipe with hex nut end into the coupling of the ceiling pan, and then tighten it with the hex nut and

the washer.

NOTE:Depth of threaded pipe may need to be adjusted to properly fit glass shade, decorative

cover and small pine cone.

8. Attach the glass shade to the fixture by inserting the threaded pipe, and then secure it with a metal pad and hex nut.

9. Attach the decorative cover onto the threaded pipe and secure it by using the pine cone.

The following parts are available for re-order if damaged or missing.

Spare Parts List:

Assembly Kit

5572MM(1 SET)

Glass Shade

9822CC