Installation Sheet

Turn on the power at fuse or circuit box.

210202

The following parts are available for re-order if damaged or missing.

Spare Parts List:

Assembly Kit

6335MM (1 SET)

Glass Shade

10238CG

Mounting Screw (B) Wire Connector (C) Bolt Nut (D)Mounting Plate Unit (A)

3. Attach the backplate to the mounting plate unit (A) by aligning and inserting the two fixture mounting screws from the

mounting plate unit (A) into the open holes on the backplate, then screw it with the two bolt nuts (D).

4. Rotate the glass shade onto the glass holder. Install 4 X 60W medium base bulbs (not included).

See relamping label at socket area or packaging for maximum wattage allowed.

A: 11-1/4"

B: 30"

C: 5-1/2"