Installation Sheet

Turn on the power at fuse or circuit box.
210316
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Assembly Kit
6341MM (1 SET)
Mounting Screw (B) Wire Connector (C) Bolt Nut (D)Mounting Plate Unit (A)
1. Attach mounting plate unit (A) to the outlet box using two mounting screws (B). Adjust the length of the preinstalled
fixture mounting screws if necessary.
Note: Make sure that the fixture mounting screws are lined up horizontally to make the fixture level.
2. Connect the smooth wire (marked) to black wire (power), the ribbed wire (unmarked) to white wire (neutral) with the
wire connectors (C) provided. Connect the copper wire on the light fixture to the mounting plate unit (A) by securing
it with the green ground screw, then connect it to the house ground wire with wire connectors (C).
Carefully put all the wires into outlet box.
3.
Attach the backplate to the mounting plate unit (A) by aligning and inserting the two fixture mounting screws from the
mounting plate unit (A) into the open holes on the backplate, then expose fixture mounting screws before screwing
the two bolt nuts (D).
4. Install 4 X 60W medium base bulbs (not included).
See relamping label at socket area or packaging for maximum wattage allowed.
Turn off the power at fuse or circuit box
Turn on the power at fuse or circuit box
Installation Steps
A: 38"
B: 7"
C: 9-1/2"