Installation Sheet

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
W0383
T
Turn on the power at fuse or circuit box.
W
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ
AND SAVE THESE INSTRUCTIONS.
Hardware Package (included):
Mounting Screw (B) Wire Connector (C) Bolt Nut (D)Mounting Plate Unit (A)
Backplate
Bolt Nut (D)
Fixture Ground Wire
Outlet Box
Wire Connector (C)
House Ground wire
Mounting Plate Unit (A)
Green Ground Screw
Mounting Screw (B)
Fixture Mounting Screw
Max 60W Medium base bulb
(not included)
Turn off the power at fuse or circuit box
Installation Steps
1. Attach mounting plate unit (A) to
the outlet box using two mounting
screws (B). Adjust the length of the
preinstalled fixture mounting screws
if necessary.
Note: Make sure that the fixture
mounting screws are lined up
horizontally to make the fixture
level.
2. Connect the smooth
wire (marked) to black
wire (power), the ribbed
wire (unmarked) to white
wire (neutral) with the wire
connectors (C) provided.
Connect the copper wire
on the light fixture to the
mounting plate unit (A) by
securing it with the green
ground screw, then connect
it to the house ground wire with
wire connectors (C).
Carefully put all the wires into outlet box.
3.
Attach the backplate to the mounting plate unit (A) by
aligning and inserting the two fixture mounting screws
from the mounting plate unit (A) into the open holes on
the backplate, then expose fixture mounting screws
before screwing the two bolt nuts (D).
4. Install 2 X 60W medium base bulbs (not included).
See relamping label at socket area or packaging for maximum wattage allowed.
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
210316