Installation Guide

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. Read and save these instructions.

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

191231

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

W0359

Hardware Package (included):

Mounting Screw (A) Wire Connector (B)

Set Screw 1 (C)

House Ground Wire

Backplate

Set Screw 2

Wire Connector (B)

Fixture Wire

Mounting Bracket

Outlet Box

Fixture Ground Wire

Glass Shade

Top Cap

Bottom Cap

Mounting Screw (A)

Green Ground Screw

Set Screw 1 (C)

Set Screw 2

PAGE 1
W0359 ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: W TO TO SHUT SHUT OFF OFF TOAVOID AVOID RISK RISK OF OF ELECTRICAL ELECTRICAL SHOCK, BE SURE TO POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. POWER WHILE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. Read and save these instructions.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box. 1. Secure the bottom cap to the backplate with two set screws 2. 2. Put the glass shade on the bottom cap and make sure the glass shade is fixed properly. 3. Secure the top cap to the backplate with two set screws 2. 4. Attach mounting bracket to the outlet box using two mounting screws (A). 5. Pull out the source wires from the outlet box.