Installation Guide (W0358)

191231

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. Read and save these instructions.

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

W0358

Hardware Package (included):

House Ground Wire

Backplate

Set Screw 2

Wire Connector (B)

Fixture Ground Wire

Bottom Cap

Mounting Bracket

Outlet Box

Fixture Wire

Mounting Screw (A)

Green Ground Screw

Set Screw 1 (C)

Glass Shade

Top Cap

Mounting Screw (A) Wire Connector (B) Set Screw 1 (C)

PAGE 1
W0358 ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: W TO TO SHUT SHUT OFF OFF TOAVOID AVOID RISK RISK OF OF ELECTRICAL ELECTRICAL SHOCK, BE SURE TO POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. POWER WHILE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. Read and save these instructions.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box. 1. Put the glass shade on the bottom cap and make sure the glass shade is fixed properly. 2. Secure the top cap to the backplate with two set screws 2. 3. Attach mounting bracket to the outlet box using two mounting screws (A). 4. Pull out the source wires from the outlet box. Make wire connections using wire connectors (B) as follows: ---Connect the hot wire (black insulation) from the power source to the black wire from the fixture.