Installation Guide

House Ground Wire

Green Ground Screw

Fixture Ground Wire

Wire Connector (C)

Ball Nut (F)

Glass Holder

Mounting Screw (B)

Mounting Plate (A)

Outlet Box

Fixture Wire

Lock Nut (E)

Headless Screw (D)

Back Plate

Socket Ring

Glass Shade

Type A Max.60 W

or ST Vintage Bulb

(not included)

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

W0348

Hardware Package (included):

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

190724

Headless Screw (D)Mounting Screw (B) Wire Connector (C)

Lock Nut (E)

Mounting plate (A) Ball Nut (F)

PAGE 1
W0348 ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box 1. Thread two headless screws (D) through the mounting plate (A), then secure them with four lock nuts (E) (two on each side of the mounting plate). Adjust the length of the headless screws (D) if necessary. Note: Make sure that the headless screws are lined up horizontally, in order to ensure that the fixture will be level. 2. Attach the mounting plate (A) to the outlet box by using two mounting screws (B). 3.