Installation Guide

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THIS INSTRUCTION.

W0376

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Metal Shade

Socket Ring

Bulb Type A Max.100W

(Not included)

Bolt Nut (D)

Fixture

Hardware Package (included):

Mounting Screw (B) Wire Connector (C) Bolt Nut (D)Cross Bar Unit (A)

Backplate

House Ground Wire

Outlet Box

Mounting Screw (B)

Green Ground Screw

Headless Screw

Cross Bar Unit (A)

Fixture Wire

Fixture Ground Wire

Wire Connector (C)

200907

PAGE 1
W0376 ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THIS INSTRUCTION.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box 1. Attach the cross bar unit (A) to the outlet box by using two mounting screws (B). 2. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows: • Connect the hot wire (black insulation) from the fixture to the black wire from the power source. • Connect the neutral wire (white insulation) from the fixture to the white wire from the power source.