Installation Guide

3. Attach the backplate to the cross bar unit (A) by inserting the headless screw, then secure it with the two bolt nuts (D) .
4. Attach the metal shade onto the fixture and tighten it with the socket ring.
5. Install 1X100W Max medium base bulb (not included). See relamping label at socket area or packaging for maximum
wattage allowed.
Turn on the power at fuse or circuit box
The following parts are available for re-order if damaged or missing.
Assembly Kit
6297MM (1SET)
Spare Parts List:
A
B
C
A：10"
B：8"
C：7-1/4"
Scoket Ring
5906SR
Mounting Screw (B) Wire Connector (C)
Bolt Nut (D)
Cross Bar Unit (A)
200907