Installation Sheet

181013
Turn on the power at fuse or circuit box.
4. Attach the back plate to the mounting plate by inserting the headless screws, then secure it with the ball nuts.
5. Attach the glass shades onto the glass brackets and secure them with the spacers and socket rings, using supplied
socket fixer.
6. Install bulbs (not included). See relamping label at socket area or packaging for maximum allowed wattage.
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Assembly Kit
5290MM (1 SET) for W0156
5955MM (1 SET) for W0303
Glass Shade
9700AB (1 PC) for W0156
10014EW (1 PC) for W0303
Mounting Screw (B)
Green Grounding
Screw (E)
Wire Connector (F)
Lock Nut (D)
Headless Screw (C)
Ball Nut (G)
Mounting Plate (A)
A: 23″
B: 10-1/2″
C: 6-1/2″