Installation Guide

141118
A: 20-3/4"
B: 6-1/4"
C: 8-3/4"
3. Pull out the source wires from the outlet box. Make wire connections using wire nuts as follow:
---Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.
---Connect the neutral wire (usually white insulation) from the fixture to the white wire from the power source.
---Attach the fixture grounding wire (usually green insulation or bare wire) to the mounting plate with the green grounding
screw. Then connect it to the house grounding wire with the wire nut.
Carefully put the wires back into the outlet box.
4. Attach the back plate to the mounting plate by inserting fixture mounting screws, then secure it with two bolt nuts.
5. Install bulbs (not included). See relamping label at socket area or packaging for maximum allowed wattage.
Turn on the power at fuse or circuit box.
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Assembly Kit
5299MM (1 SET) for W0152
Mounting Screw (A)
Wire Nut (B)
Green Grounding
Screw
Fixture Mounting
Screw
Bolt Nut
Dry Wall
Screw (C)
Anchor (D)