Installation Guide

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
W0109
Glass bracket
Bulb Type B Max.60W
(not included)
Mounting Screw (B)
Green Grounding Screw (C)
Wire Nut (E)
Parts:
131226
Parts Number (4990MM)
Mounting Screw (B)
Green Grounding
Screw (C)
Hex Nut (F)
Wire Nut (E)
Mounting Strap (A)
Socket Ring
Glass Shade (J)
Finial (H)
Washer (G)
Socket Fixer (I)
House Grounding Wire
Fixture Grounding Wire
Outlet Box
Fixture Wire
Back Plate
Nipple (D)
Parts Number (9596CH)
Glass Shade (J) (X2)
Parts Number (4993XX)
Socket Fixer (I) (X1)
Spacer
Nipple (D)
Mounting Strap (A)
Hex Nut (F)
Washer (G)
Finial (H)
1. Attach the nipple to the mounting strap, then secure it with a washer and hex nut.
2. Attach the mounting strap to the outlet box by using two mounting screws.
3. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections
by using the wire nuts:
---Connect the black (hot) wire from the fixture to the black (hot) wire from the power source.
---Connect the white (neutral) wire from the fixture to the white (neutral) wire from the power source.
---Attach the fixture grounding wire to the mounting plate with the green grounding screw. Then
connect it to the house grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
4. Attach the fixture to the mounting strap by inserting the nipple, then
secure it with a finial.