Installation Sheet

210311
7. Attach the metal frame back to the fixture by aligning holes, secure them with the two set screws.
8. Thread the fixture wire and fixture grounding wire through the mounting strap unit (A).
9. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows:
• Connect the smooth wire (marked) from the fixture to the black wire from the power source.
• Connect the ridged wire (unmarked) from the fixture to the white wire from the power source.
• Attach the fixture grounding wire (usually green with the insulation or bare wire) to the mounting strap unit (A)
with the green grounding screw. Then, depending on local code, connect it to the house grounding wire with the
wire connector (C).
Carefully put all of the wires back into the outlet box.
10. Attach the canopy (D) to the mounting strap unit (A) by inserting the top loop, then secure it with the collar (E).
11. Install the bulb (not included). See relamping label at socket area or packaging for maximum wattage allowed.
Spare Parts List:
The following parts are available for re-order if damaged or missing.
Turn on the power at fuse or circuit
box.
Mounting Strap Unit (A) Wire Connector (C)
Collar (E)
Mounting Screw (B)
Canopy (D)
Loop Lock (F)
Chain (G)
Mounting Hardware
6361MM (1 SET)
Glass Panel
X4
10253CG
A
B
A: 13-1/4”
B: 8”