Installation Sheet

The following parts are available for re-order if damaged or missing.

Spare Parts List:

Set screw (D) Mounting Screw (B) Wire Connector (C)Mounting Plate Unit (A)

Mounting Hardware

6360MM (1SET)

Rubber Pad (E)

T0607

A: 11-3/4"

B: 6-1/2"

C: 7-1/2"

T0608

A: 14"

B: 8"

C: 9"

Glass Panel

10253CG for T0608

Glass Panel

10252CG for T0607

1. Turn off the power at the fuse or circuit box before starting installation.

2. Loosen the wire connector connected with the wires from photocell. (See Fig.2)

Note: Do not remove the photocell to prevent water from seeping into the outlet box.

3. Take a white pigtail and black pigtail and make wire connections using wire connector (C): (See Fig.3)

a. The black wire from the fixture to one end of the black pigtail.

b. The white wire from the fixture to one end of the white pigtail.

c. The other end of the black pigtail to the black wire from the power source.

d. The other end of the white pigtail to the white wire from the power source.

Put all wires back into the back plate of the fixture.

Turn on the power at fuse or circuit box

210312