Installation Sheet

The following parts are available for re-order if damaged or missing.

Spare Parts List:

Assembly Kit

6359MM (1 SET)

Glass Shade

10250CS for T0603

Glass Shade

10251CS for T0604

Mounting Screw (B) Wire Connector (C) Bolt Nut (D) Rubber Pad (E)Mounting Plate Unit (A)

Turn on the power at fuse or circuit box.

1. Turn off the power at the fuse or circuit box before starting installation.

2. Loosen the wire connector connected with the wires from photocell. (See Fig.1)

Note: Do not remove the photocell to prevent water from seeping into the outlet box.

3. Take a white pigtail and black pigtail and make wire connections using wire connector (C): (See Fig.2)

a. The black wire from the fixture to one end of the black pigtail.

b. The white wire from the fixture to one end of the white pigtail.

c. The other end of the black pigtail to the black wire from the power source.

d. The other end of the white pigtail to the white wire from the power source.

Put all wires back into the backplate of the fixture.

T0603

A: 16"

B: 4-1/4"

C: 7"

T0604

A: 20"

B: 4-1/4"

C: 7"

210312