Installation Guide

191128

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

T0562 / T0563

Mounting Screw (B) Wire Connector (C) End Cap (D)Mounting Strap Unit (A)

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

WARNING: Turn off the main power at circuit breaker before installing fixture.

AVERTISSEMENT: Coupez la source d’alimentation principale au panneau

central de disjoncteurs avant d’installer le luminaire.

Mounting Screw (B)

Fixture Wire

Mounting Strap Unit (A)

Hex Nut

Wire Connector (C)

Washer

Fixture Grounding Wire

Backplate

Green Grounding Screw

Outlet Box

House Grounding Wire

Threaded pipe

Fixture

End Cap (D)

Hole

Socket

Glass Panel

Fixture

Clip

Fig.1

Glass Panel

Max.60W Type T Bulb

(not included)

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ

AND SAVE THESE INSTRUCTIONS.

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS T0562 / T0563 TOmain AVOIDpower RISK OF SHOCK, BE SURE TO SHUT OFF WARNING: Turn off the at ELECTRICAL circuit breaker before installing fixture. POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. AVERTISSEMENT: Coupez la source d’alimentation principale au panneau central de disjoncteurs avant d’installer le luminaire. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box 1. Attach the mounting strap unit (A) to the outlet box by using two mounting screws (B). 2. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows: • Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source. • Connect the neutral wire (usually white insulation) from the fixture to the white wire from the power source.