Installation Guide

191129
Turn on the power at fuse or circuit box.
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Assembly Kit
6191MM (1 SET)
3. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows:
• Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.
• Connect the neutral wire (usually white insulation) from the fixture to the white wire from the power source.
• Attach the fixture grounding wire (usually green insulation or bare wire) to the mounting plate (A) with the green
grounding screw (D), then connect it to the house grounding wire with the wire connector (C).
Carefully put all of the wires back into the outlet box.
4. Attach the fixture to the mounting plate (A), then secure it with the two rubber pads (F) and the two set screws (E).
A
B
C
A: 15-1/2”
B: 5-3/4”
C: 3-1/2”
Wire Connector (C)Mounting Screw (B)Mounting Plate (A) Set Screw (E)Green Grounding
Screw (D)
Rubber Pad (F)