Installation Sheet

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
T0475
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Turn off the power at fuse or circuit box
Installation Steps
Hardware Package (included):
Green Grounding Screw (E)
Headless screw (D)
Mounting Screw (B)
Lock Nut (F)
Mounting plate (A)
Rubber Pad (H)
Ball Nut (G)
Wire Connector (C)
Bulb Type B
Max.60W
(not included)
181221
IMPORTANT:
The sensor has an excellent photocell function
to enable the light to turn on at dusk and off at
dawn automatically.
Rubber Pad (H)
Back Plate
Ball Nut (G)
Photocell
House Grounding Wire
Fixture Grounding Wire
Wire Connector (C)
Mounting Plate (A)
Outlet Box
Fixture
Wire
Lock Nut (F)
Headless Screw (D)
Mounting Screw (B)
Green Grounding Screw (E)
Metal Frame
1. Thread two headless screws (D) through the mounting plate (A), and then secure them with four lock nuts (F) (two on each
side of the mounting plate (A).) Adjust the length of the headless screws (D) if necessary.
Note: Make sure the headless screws are lined up horizontally to make the fixture level.
2. Attach the mounting plate (A) to the outlet box by using two mounting screws (B).