Installation Sheet

Page 4 / 4

A: 4-1/2"

B: 9-3/4"

C: 4-1/2"

170519

5-YEAR LIMITED WARRANTY:

All products are warranted to be free of defects in material and workmanship for five (5) years from date of purchase.

This warranty is limited to the correction of any such defect, or the replacement of any such defective item(s), provided

that: (a) we are properly notified and consent to return of the item(s) in question:(b) the item(s) is / are returned with

proof of purchase date; and (c) it is found upon inspection by us that the item(s) is / are defective as noted above. This

warranty does not cover labor costs, consequential damages, nor does it apply to any item(s) that have been

improperly installed, overloaded, altered, or otherwise abused by the customer, its agent(s) or employee(s). Finishes

are specially excluded from the terms of this warranty since they are subject to environmental maintenance deemed

beyond our control. Other than the described obligation, we assume no further liability with respect to the sale or use of

our products. We make no warranty, express or implied, and disclaim any warranty of merchantability or fitness for a

particular purpose.

The following parts are available for re-order if damaged or missing.

---In 3H or 6H Mode, the light is still on full brightness, even though it has been 3 hours or 6 hours

after dusk, respectively:

1. Make sure no motion could be picked up by the sensor.

2. Make sure that mode entry is not in manual override.

---After performing 3H or 6H Mode, the light stays on full brightness after 3 minutes:

1. Make sure there is no movement that could be picked up by the sensor.

2. Adjust the time knob counterclockwise to reduce the delay shut-off time.

----In 3H or 6H Mode, the light turns off completely, instead of low level brightness, after 3 minutes:

1. Make sure the LED is not burned out.

2. make sure the low level is not at the 0% position.

-- The light blinks:

1. Make sure the light is not mounted near a barbecue, air conditioner or other heat source.

2. Adjust the sensitivity knob counterclockwise to avoid unnecessary triggering like a passing car or reflecting objects.

Spare Parts List:

Mounting Screw (B)

Green Grounding

Screw (C)

Lock Nut (F)

Wire Nut (E)

Ball Nut (G)

Rubber Pad (H)

Cross Bar (A)

Headless

Screw (D)

Assembly Kit

5741MM (1 SET) FOR T0343

5742MM ( 1 SET) FOR T0344