Specification Sheet

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
T0317
161008
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Hex Nut (F)
Wire Nut (D)
Canopy (H)
Top Loop (I)
Collar (J)
Threaded Pipe (E)
Washer (G)
Loop Lock (K)
Chain (L)
Fixture Body
4. Connect the chain:
- Determine length of chain needed to achieve
desired fixture height. (To remove excess chain
section, use pliers to bend link open.)
- Weave the fixture wires and fixture grounding wire
through the chain, collar and canopy.
5. Connect one end of the chain to the loop using
a loop lock.
1. Attach the threaded pipe to the mounting strap, and then secure it
with a washer and a hex nut.
2. Attach the mounting strap to the outlet box using two
mounting screws.
3. Secure the top loop to the threaded pipe.
Outlet Box
House Grounding Wire
Wire Nut(D)
Fixture Wire
Fixture Grounding Wire
Mounting Strap(A)
Green Grounding Screw(C)
Mounting Screw(B)
Threaded Pipe (E)
Canopy(H)
Top Loop(I)
Hex Nut(F)
Washer(G)
Collar(J)
Loop Lock(K)
Loop Lock(K)
Chain(L)
Loop
6. Connect another end of the chain to top loop
by using another loop lock.
7.Thread the fixture wire and fixture grounding wire
through the top loop, threaded pipe and mounting strap.
Turn off the power at fuse or circuit box
Installation Steps
Bulb Type A Max.100W
(not included)
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Hardware Package (included):