Installation Sheet

3. Pull out the outlet wires and house grounding wire from the outlet box. Make wire connections using the wire
nuts:
---The black wire from the fixture to the black wire from the power source.
---The white wire from the fixture to the white wire from the power source.
---Attach the fixture grounding wire to the cross bar with the green grounding screw. Then connect it to
the house grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
4. Attach the fixture to the cross bar by inserting the headless screws, then secure it with the rubber pads and
bolt nuts.
CAUTION: With silicone caulking compound, caulk completely around where the back plate meets
with the wall surface to prevent water from seeping into the outlet box.
161014
A
B
C
T0308
A: 5-1/2”
B: 9-3/4”
C: 6-1/2”
T0309
A: 7-1/4”
B: 13-1/2”
C: 8”
Spare Parts List:
Mounting Hardware
5624MM(1 SET)
The following parts are available for re-order if damaged or missing.
Green Grounding
Screw (E)
Headless
screw (D)
Mounting Screw (B)
Wire Nut (C)
Lock Nut (F)
Cross Bar (A)
Bolt Nut (H)
Rubber Pad (G)
Turn on the power at fuse or circuit box.