Installation Guide

141203
A: 8"
B: 13-1/8"
6. Connect one end of the chain to the loop using a loop lock.
7. Connect the other end of the chain to top loop by using the other loop lock.
8.Thread the fixture wire and fixture grounding wire through the top loop, threaded pipe and mounting strap.
9. Pull out the source wires from the outlet box. Make wire connections using wire nuts as follows:
---Connect the smooth-coated wire (marked) from the fixture to the black wire from the power source.
---Connect the ribbed-coated wire (unmarked) from the fixture to the white wire from the power source.
---Attach the fixture grounding wire to the mounting strap with the green grounding screw. Then connect it to the house
grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
10. Attach the canopy to the mounting strap by inserting the top loop, then secure it with the collar.
Note: With silicone caulking compound, caulk completely around where back of canopy meets with the
ceiling surface to prevent water from seeping into the outlet box.
Turn on the power at fuse or circuit box.
Spare Parts List:
Assembly Kit
5168MM (1 SET)
The following parts are available for re-order if damaged or missing.
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Wire Nut (D)
Canopy (I)
Loop Lock (K)
Chain (L)
Hex Nut (E)
Washer (F)
Threaded Pipe(G)
Top Loop (H)
Collar (J)
Glass Shade
9646CK(1PCS)