Specification Sheet
170228
ASSEMBLY AND INSTALLATION 
 INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
 2. READ AND SAVE THESE INSTRUCTIONS.
P0196 / P0228
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Hardware Package (included):
1. Thread fixture mounting screws through mounting 
 strap, and then secure them with two lock nuts. Adjust 
 the length of fixture mounting screws if necessary.
2. Attach mounting strap to outlet box using two mounting 
 screws.
3. Rod Connections:
 a. Thread the fixture wire from the fixture through the 
 lower rod, and then secure the lower rod onto fixture 
 using the threaded pipe. 
 b. Thread the fixture wire through the middle rod, and 
 then secure the middle rod onto the lower rod using
 the threaded pipe.
 c. Thread the fixture wire through the upper rod, and 
 then secure the upper rod onto the middle rod using
 the threaded pipe.
 Note: Length adjustable from 30-1/2" to 75-1/2". Use fewer rods if shorter length is desired.
4. Thread the fixture wire through coupling kit, canopy, and then secure the rod assembly to the coupling kit. 
5. Screw 12 long rods to the other threaded pipes of fixture.
6. Install bulbs (not included). See relamping label at socket area or packaging for maximum allowed wattage.
7. Pull out the source wires from the outlet box. Make wire connections using wire nuts as follows:
 ---Connect the smooth-coated wire (marked) from the fixture to the black wire from the power source.
 ---Connect the ribbed-coated wire (unmarked) from the fixture to the white wire from the power source.
 ---Attach the fixture grounding wire to the mounting strap with the green grounding screw, and then connect it to 
 the house grounding wire with a wire nut.
 Carefully put the wires back into the outlet box.
Turn off the power at fuse or circuit box.
Installation Steps
Mounting Screw (C)
Lock Nut (E)
Wire Nut (F)
Ball Nut (G)
Mounting Strap (A)
Fixture Mounting 
Screw (D)
Green Grounding 
 Screw (B)
Long Rod
Socket
Fixture
Threaded Pipe
Threaded Pipe
Threaded Pipe
Threaded Pipe
Ball Nut (G)
Canopy
Coupling Kit
Vintage Bulb 
Max.60W
(not included) 
Outlet Box
House Grounding Wire
Wire Nut (F)
Fixture Mounting Screw (D)
Mounting Strap (A)
Lock Nut (E)
Green Grounding Screw (B)
Mounting Screw (C)
Upper Rod
Middle Rod
Lower Rod


