Installation Guide

8. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows:

--- Connect the black wire from the driver input to the black wire from the power source.

--- Connect the white wire from the driver input to the white wire from the power source.

--- Attach the fixture ground wire to the mounting plate (A) with the green groundscrew, then connect it to the house

ground wire with a wire connector (C).

Carefully put the wires back into the outlet box.

9. Attach the canopy to the mounting unit by inserting the set

screws (D) .

10. Angled mounting recommended for a vaulted or angled ceiling.

(See Fig. 1)

Fig. 1

Outlet Box

Support Brace

Canopy

Coupling Kit

191231

Spare Parts List:

The following parts are available for re-order if damaged or missing.

Mounting Hardware

6178MM(1 SET)

Turn on the power at fuse or circuit

box.

A: 13”

B: 6-1/4”

12”Rod X3

3052RD

6”Rod X1

3051RD

3”Rod X1

3050RD

Upper Glass Shade

10123OB

Lower Glass Shade

10123OB

Note: Suggested dimmers are Lutron: MACL-153MH, DVWCL-153PH, TGCL-153PH, SCL-153P.

Mounting Plate (A) Wire Connector (C)

Set Screw (D)

Mounting Screw (B)