Installation Sheet

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT
OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: Before installing, consult local electrical codes for wiring and grounding requirements.
OW24953
Installation Steps:
Ball Nut
Fixture
Mounting Screw
Screw
Fixture Wire
Lock Nut
Cross Bar
Ground Wire
Ground Screw
Wire Nut
Wall Box
1.Attach 2 screws to the cross bar, and then secure with 2 lock nuts.
2.Attach the cross bar to wall box by using 2 mounting screws.
3.Make wire connections:
---Black wire from fixture to black wire from power source.
---White wire from fixture to white wire from power source.
---Attach the ground wire and house ground wire to the cross bar with
a green ground screw.
Carefully tuck wires back into the wall box.
4.Attach the fixture to the cross bar by inserting the screws, and then secure
with the ball nuts.
5.Install a bulb. (Please do not exceed the maximum capacity which is
recommended on the socket.)
6.Turn on the power at fuse or circuit box.