Installation Sheet

Turn on the power at fuse or circuit box.
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Mounting Hardware
6338MM(1 SET)
7. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows:
---Connect the smooth-coated wire (marked) from the fixture to the black wire from the power source.
---Connect the ribbed-coated wire (unmarked) from the fixture to the white wire from the power source.
---Attach the fixture ground wire to the mounting strap unit (A) with the green ground screw, then connect it to
the house ground wire with a wire connector (C).
Carefully put the wires back into the outlet box.
8. Attach the canopy to the mounting strap unit (A) and secure it with a finial (D).
9. Install the bulbs (not included). See relamping label at socket area or packaging for maximum wattage allowed.
Mounting Strap Unit (A) Mounting Screw (B)
Finial (D)
Wire Connector (C)
Loop Lock (E)
Chain (F)
A
C
B
A: 19-1/2”~96-1/2”
B: 35”
C: 13”
210319