Installation Sheet

210322

Pull out the outlet wires and house ground wire from the outlet box. Make wire connections using the

wire connectors (C):

---The smooth wire (marked) from the fixture to the black wire from the power source.

---The ridged wire (unmarked) from the fixture to the white wire from the power source.

---Attach the fixture ground wire to the mounting strap unit (A) with the green ground screw.

Then connect it to the house ground wire with a wire connector (C). Carefully put the wires back into the outlet box.

8. Attach the canopy (H) to the mounting strap unit (A) by inserting the top loop (I), then secure it with the collar (J).

9. Install six bulbs (not included). See relamping label at socket area or packaging for maximum wattage allowed.

Spare Parts List:

The following parts are available for re-order if damaged or missing.

Turn on the power at fuse or circuit

box.

Mounting Strap Unit (A) Wire Connector (C)

Collar (E)

Mounting Screw (B)

Canopy (D)

Loop Lock (F)

Chain (G)

Assembly Kit

6332MM (1 SET)

A: 32-1/2”~104-1/2”

B: 30-1/2”