Installation Guide

191127

8. Pull out the outlet wires and house ground wire from the outlet box. Make wire connections

using the wire connectors (C):

---The smooth wire (marked) from the fixture to the black wire from the power source.

---The ridged wire (unmarked) from the fixture to the white wire from the power source.

---Attach the fixture ground wire to the mounting strap (A) with the green ground screw.

Then connect it to the house ground wire with a wire connector (C).

Carefully put the wires back into the outlet box.

9. Attach the canopy (H) to the mounting strap (G) by inserting the top loop (H), then secure it with the

collar (I).

10.

Attach the crystal

to the fixture.

11. Install bulbs (not included). See relamping label at socket area or packaging for maximum wattage

allowed .

Mounting Strap (A) Wire Connector (C)

Collar (I)

Washer (F)

Mounting Screw (B)

Hex Nut (E) Canopy (G) Top Loop (H)

Threaded Pipe (D)

Loop Lock (J)

Chain (K)

Spare Parts List:

The following parts are available for re-order if damaged or missing.

Mounting Hardware

6174MM(1 SET)

Crystal

5128CD

Turn on the power at fuse or circuit

box.

A: 26”

B: 25”