Installation Guide

190424
Turn on the power at fuse or circuit box
Assembly Kit
6093MM (1SET)
6. Thread the fixture wire and fixture ground wire through the top loop, threaded pipe and mounting strap unit (A).
7. Pull out the source wires from the outlet box.
Make wire connections using wire connectors (C) as follows:
---Connect the smooth-coated wire (marked) from the fixture to the black wire from the power source.
---Connect the ribbed-coated wire (unmarked) from the fixture to the white wire from the power source.
---Attach the fixture ground wire to the mounting strap unit (A) with the green ground screw, and then connect
it to the house ground wire with a wire connector (C).
Carefully put the wires back into the outlet box.
8. Attach the canopy (D) to the mounting strap unit (A), insert the top loop through hole, and then secure it by
tightening collar (E).
9. Install nine bulbs (not included).
Check relamping label at socket area or packaging for maximum allowed wattage.
Mounting Strap Unit (A) Mounting Screw (B) Wire Connector (C)
Canopy (D)
Loop Lock (F)
Collar (E)
Chain (G)
3198CN
The following parts are available for re-order if damaged or missing.
Spare Parts List: