Installation Sheet

Note: 1. Remote controller can not be used along with a solid-state speed control at the same time.
2. The direction of fan rotation can’t be set without remote controller.
Fig.20
Fig.21
Receiver
Canopy
Hanger Bracket
Turn OFF the electric circuit at the main fuse or circuit breaker box. (See Fig.19)
Unscrew the canopy. Remove the wire connectors from the fan to ceiling
wire connection. The receiver should be removed from the hanger bracket.
(See Fig.21)
Transmitter
Wall Bracket
Screw
Fig.19
Fig.22
Turn ON the electric circuit at the main fuse or circuit breaker box.
PAGE: 9 / 11
210811