Installation Sheet

ManualsBrandsVaxcel Lighting ManualsCeiling FansOdell 52" 3 Blade LED Ceiling Fan with Remote Control

NOTE: The fan weight is 15.43 lbs (7 kg). Be sure the outlet box you are using is securely attached to the building

structure and can support the full weight of the fan. Failing to do so can result in serious injury.

INSTALLATION INSTRUCTIONS

IMPORTANT:

BEFORE YOU BEGIN INSTALLING THE FAN, CAREFULLY READ ALL INFORMATION IN

SAVE ALL INSTRUCTIONS.

Align and engage the bottom holes from blade to the bottom fan motor then fix them

together with the pre-installed motor screws provided. In order to adjust the blade, the

motor screws can’t be tightened. Carefully align the top holes from blade to the upper

fan motor and then secure with the pre-installed motor screws provided and tighten the

motor screws on the bottom of the fan motor. Follow the same process for the remaining two blades.

Installation Steps :

Fig.1

Turn OFF the electric circuit at the

main fuse or circuit breaker box.

THE SAFETY

INSTRUCTIONS AND INSTALLATION INSTRUCTIONS. IF IN DOUBT, CONSULT A QUALIFIED

ELECTRICIAN.

Thread the motor wires

through the downrod

stand cover, decorative

cap (Making sure the

smooth side of decorative

cap is facing downward.),

canopy and downrod.

Remove the lock pin and take off

the hanger pin.

Loosen the collar screws

out part way. Insert the

downrod into the collar.

Slide hanger pin through

holes of collar and downrod.

Hanger Pin

Lock Pin

Fig.5

Collar

Fig.6

Motor Wires

Downrod

Stand

Cover

Canopy

Decorative

Cap

Collar

Hang Pin

Fig.7

Motor Wires

Downrod

Stand Cover

Canopy

Decorative

Cap

Fig.3

Motor Screws

Fan Motor

Blade

Fig.4

Motor Screws

Blade

PAGE: 5 / 11

Tighten the hanger bracket to the outlet box with two mounting screws.(Make sure

the outlet box is securely installed so that it will be able to support at least the

fan weight.) Attach the safety cable hook to the ceiling with the dry wall screw and

washer, and make sure the safety cable hook is covered by the fan canopy.

WARNING: MOUNT ONLY TO AN OUTLET BOX MARKED "ACCEPTABLE FOR

FAN SUPPORT"!

Washer

Safety Cable Hook

Dry Wall Screw

Ceiling

Hanger Bracket

Ceiling Joist

Wood Member

(2" x 4" Approx.)

Junction Box

Fig.5.Fig.2.