Installation Sheet

Note: Remote controller can not be worked along with solid-state speed control at the same time.

Turn OFF the electric circuit at the main fuse or circuit breaker box. (See Fig.24)

Unscrew the canopy.

Remove the wire connectors

from the fan to ceiling wire

connection. The receiver

should be removed from the

hanger bracket.(See Fig.25)

.26

Fig.22

MED

LIGHT

0N/0FF

DIMMER

FAN OFF

LOW

Install the battery (9V, included) to the transmitter.

* Press "HI" button to turn on the fan at high speed.

* Press "MED" button to turn the fan in medium speed.

* Press "LOW" button to turn the fan in low speed.

* Press "FAN OFF" button to turn off the fan.

* Press "LIGHT ON /OFF" button to turn on or turn off the light.

* Press and hold the "DIMMER" button to dim or brighten lights to the desired level and

release, and the brightness level will be memorized.Turn on the light again, then fan

light will restore on of the brightness level which was dimmed last time.

Note:

1. This remote controller has memory function setting. The fan will operate at the same

speed and the fan light will stay at the same brightness as the last time the power supply

was turned off.

2. Compatible wall switch model No.: Lutron SKU# S2-LFSQH-WH / MACLLFQH-WH.

Transmitter

Wall Bracket

Screw

Fig.24

Fig.25

PAGE: 9 / 11

210811