Installation Sheet

Mounting Bracket
Washer
Hex Nut
Unscrew the washers and hex
nuts from mounting bracket.
Tighten the hanger bracket to the outlet
box with two mounting screws.
(Make sure the outlet box is securely
installed so that it will be able to
support at least the fan weight.)
Attach the safety cable hook to the
ceiling and make sure the safety
cable hook is covered by the fan
canopy. Pull the electrical wires from
the outlet box through the center hole
of the mounting bracket for motor wiring
installation.
WARNING: MOUNT ONLY TO AN
OUTLET BOX MARKED
"ACCEPTABLE FOR FAN SUPPORT"!
Unscrew hang motor assembly onto
mounting bracket. Insert the long loop
hole of mounting bar to the poth
hook for hands-free wiring. (See Fig.4)
Turn OFF the electric circuit at
the main fuse or circuit breaker
box.
Long Loop Hole
Mounting Bar
Mounting Bracket
17.86
8.1
PAGE: 5 / 9
Safety Cable Hook
Ceiling
Hanger Bracket
Ceiling Joist
Wood Member
(2" x 4" Approx.)
210413