Installation Guide

BEFORE YOU BEGIN INSTALLATION, CAREFULLY READ ALL INFORMATION PROVIDED IN THE SAFETY
INSTRUCTIONS AND INSTALLATION INSTRUCTIONS. IF IN DOUBT, CONSULT A QUALIFIED
ELECTRICIAN.
SAVE ALL INSTRUCTIONS.
Thread the motor wires through the
Downrod Stand Cover, Canopy,
Downrod and Big Rubber Sheath.
Tighten the two Collar Screws.
Slide Lock Pin into Hanger
Pin until it is locked into position.
F A N C O
PAGE: 5 / 10
191112
Big Rubber
Sheath
Big Rubber
Sheath