Installation Sheet

PAGE: 7 / 8
Fig.18
Turn ON the electric power at the main fuse
or circuit breaker box.
The slide switch sets the direction of fan rotation. Select the direction
of fan rotation you need by sliding the switch. Push the slide switch
bottom for " Forward" and top for "Reverse".
Fig.17-b
Reverse
Forward
Fan Speed Pull
Chain
Fan Light Pull
Chain
Reverse
Forward
Fig.17-a
Slide Switch
Slide Switch
Fig.15
Switch Box
Screw
Make wire connections using the
connectors respectivly from the switch
box and fan light.
--- The blue wire from the switch box
to the black wire from fan light.
--- The white wire from the switch box
to the white wire from fan light.
Carefully put the wires into the switch
box.
Switch Box
Fan Light
Connector
Fig.14
Install bulbs (Included).
a. Attach the suction cap to the top surface of the halogen bulb lens.
b. Insert and twist the bulb (GU10 BASE MR16C BULB ONLY) into the socket by
using the suction cap.
c. Remove the cupule from the halogen bulb lens by pulling the knob of the suction
cap.
d. Repeat with other bulbs.
Note: Do not discard the suction cap, it will be needed when replacing the bulb.
Note: Adjust the spotlight head to a desired position by using the swivel.
Caution: Turn off the power and allow the fixture to cool down completely before
relamping the lamp.
Secure the fan light onto the switch box
by using the switch box screws.
Bulb GU10 Max.50W
(included)
Suction Cap
Fig.16
F A N C O
140820