Installation Guide

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

T0588

WARNING: Turn off the main power at circuit breaker before installing fixture.

AVERTISSEMENT: Coupez la source d’alimentation principale au panneau

central de disjoncteurs avant d’installer le luminaire.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ

AND SAVE THESE INSTRUCTIONS.

Hardware Package (included):

Mounting Screw (B) Wire Connector (C) Long Set Screw (D) Short Set Screw (E)Mounting Plate Unit (A)

201013

Long Set Screw (D)

Backplate

Wire Connector (C)

House Grounding Wire

Outlet Box

Mounting Screw (B)

Green Grounding Screw

Mounting Plate Unit (A)

Fixture Wire

Short Set Screw (E)

Fixture Grounding Wire

Bulb Type A Max.60W

(not included)

Bulb Type A Max.60W

(not included)

Cover

Fixture

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS T0588 W WARNING: Turn off the main power at circuit breaker before installing fixture. AVERTISSEMENT: Coupez la source d’alimentation principale au panneau central de disjoncteurs avant d’installer le luminaire. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS. Hardware Package (included): Mounting Plate Unit (A) Mounting Screw (B) Wire Connector (C) Bulb Type A Max.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box. 1. Remove the long set screw (D), short set screw (E) and the mounting plate unit (A) from the backplate. 2. Attach the mounting plate unit (A) to the outlet box by using two mounting screws (B) . 3. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows: • Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.