Installation Sheet

1. Attach two screws to the mounting strap, and
then secure with two lock nuts.(You can adjust
the length of the screws if necessary.)
2. Attach the mounting strap to the ceiling box
by using two mounting screws.
3. Make wire connections with wire nuts:
---Connect the black wire from fixture to the
black wire from power source.
---Connect the white wire from fixture to the
white wire from power source.
---Attach the grounding wire and house
grounding wire to the mounting strap with
a green grounding screw.
Carefully tuck wires back into the ceiling box. 
4. Attach the canopy to the mounting strap, and
secure with the bolt nuts.
5. Install bulbs.(Please do not exceed the
maximum capacity, which is recommended
on the package.)
6. Attach the rubber pad upward to the box. Then
Place the glass shade and antler through the
nipple.Then secure them with the finial.
7.Turn on the power at fuse or circuit box.
NOTE:
Be
fo
re
in
st
a
lli
n
g
,
c
on
s
ul
t
loca
l
e
le
c
tri
ca
l
c
od
e
s
fo
r wirin
g
a
n
d
g
r
ound
in
g
re
q
ui
re
m
e
nts.
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
CF33012
Installation Steps
Glass Shade
Finial
Nipple
Box
Rubber Pad
Fixture
Antler
Canopy
Bolt Nut
Lock Nut
Ceiling Box
Wire Nut
Screw
Mounting Strap
Grounding Screw
House Grounding Wire
Green Grounding Wire
Mounting Screw
Fixture Wire