Installation Guide (C0239)

191105

A: 15-1/2”

B: 32”

Spare Parts List:

Assembly Kit

6167MM (1SET)

The following parts are available for re-order if damaged or missing.

Glass Shade

9847CG

Mounting Strap (A)

Set Screw (H)

Green Ground

Screw (E)

Fixture Mounting

Screw (D)

Mounting Screw (B) Wire Connector (C)

Lock Nut (F) Ball Nut (G)

4. Pull out the source wires from the outlet box. Make wire connections using wire connector (C) as follows:

---Connect the black wire from the fixture to the black wire from the power source.

---Connect the white wire from the fixture to the white wire from the power source.

---Attach the fixture ground wire to the mounting strap (A) with the green ground screw (E), then connect it to the

house ground wire with a wire connector (C).

Carefully put the wires back into the outlet box.

4. Install the bulbs (not included). Check relamping label at socket area or packaging for maximum wattage allowed .

5. Attach the glass shade onto the socket and tighten it with set screws (H).

6. Attach the canopy onto the outlet and tighten it with two ball nuts (G).

Turn on the power at fuse or circuit box