Manualshelf

Installation Sheet

ManualsBrandsVaxcel Lighting ManualsIndoor Ceiling FixturesAlto Single Light 5" Wide LED Accent Light Ceiling Fixture with a Metal Shade
12
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
C0218
Hardware Package (included):
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
181206
Turn off the power at fuse or circuit box
Turn on the power at fuse or circuit box
Installation Steps
1. Attach the cross bar (A) to the outlet box by using
two mounting screws (B).
2. Pull out the outlet wires and the house grounding
wire from the outlet box. Make wire connections
by using the wire connector (C) as follows.
--- Connect the black (hot) wire from the
fixture to the black (hot) wire from the power source.
--- Connect the white (neutral) wire from the fixture to
the white (neutral) wire from the power source.
--- Attach the fixture grounding wire to the cross
bar (A) with the green grounding screw.
Then connect it to the house grounding wire
with a wire connector (C).
Carefully put the wires back into the outlet box.
3. Attach the canopy to the cross bar (A) by aligning
holes, secure the set screws from the side hole
of the canopy into the hole in the side of the cross bar (A)，
then tighten the screws.
4. Attach the cupule (D) to the top surface of the bulb lens.Insert
the bulb (E) into the socket using the cupule (D).Twist bulb
to lock pins in place. Remove the cupule (D) from the bulb lens
by pulling the knob of the cupule (D).
Caution：LED Bulb, Type MR GU10 base, maximum 25W
Halogen Bulb, Type MR GU10 base, maximum 50W
Notes: LED Dimmable bulb to be compatible with most LED Dimmers, recommended Lutron:
MSCL-OP153MH, MACL-153MH, DVWCL-153PH, TGCL-153PH, SCL-153PH.
5. Adjust the light head to a desired position by using the swivel.
Outlet Box
Set Screw
Mounting Screw (B)
Wire Connector (C)
Cross Bar (A)
Green Grounding Screw
GU10 LED Max.7W (E)
(included)
Cross Bar (A)
Mounting Screw (B) Wire Connector (C) Cupule (D) GU10 LED Bulb
Max.7W (E)
Light Head
Cupule (D)
Canopy
Swivel

Summary of content (2 pages)