Installation Sheet

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

C0118

Hardware Package (included):

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

160712

Cross Bar (A)

Anchor (F) Washer (G) Finial (H)

Shell (I)

Mounting Screw (E)

Green Grounding

Screw (C)

Wire Nut (D)

Drywall Screw (B)

Outlet Box

Housing Grounding Wire

Wire Nut (D)

Fixture Wire

Housing Wire

Fixture Grounding Wire

Anchor (F)

Cross Bar (A)

Washer (G)

Drywall Screw (B)

Green Ground Screw (C)

Mounting Screw (E)

Fixture

Socket

Finial(H)

Shell(I)

Bulb Type B Max.40W

(not included)

Fishing Line (J)

x1M

PAGE 1
C0118 ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box. 1.Remove the cross bar from the fixture by unscrewing the finial. 2.Hold the cross bar to the outlet box and mark the outermost set holes on the wall surface for drilling. Remove the cross bar from the outlet box. Drill four set holes. Thread the anchors into the holes, then attach the cross bar to the outlet box by using two washers and two mounting screws.