Installation Sheet

Turn on the power at fuse or circuit box
Green Ground
Screw (E)
Fixture Mounting
Screw(D)
Mounting Screw (B)
Wire Connector (C)
Lock Nut (F)
Bolt Nut (G)
211019
8. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows:
---Connect the hot wire (black insulation) from the fixture to the black wire from the power source.
---Connect the neutral wire (white insulation) from the fixture to the white wire from the power source.
---Attach the fixture ground wire (green insulation or bare wire) to the mounting plate (A) with the green
ground screw (E), and then connect it to the house ground wire with the wire connector (C).
Carefully put all of the wires back into the outlet box.
9. Attach the canopy to the mounting plate (A) by inserting the fixture mounting screws (D), and then
secure it with two bolt nuts (G).
Mounting Plate (A)
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Mounting Hardware
5454MM (1 SET) for C0112
6443MM (1 SET) for C0258
A: 20-1/2"
B: 10-3/4"
Linen Shade
1107S
Plastic Plate
7195PP
Assembly Kit
5455AA (1 SET) for C0112
6444AA (1 SET) for C0258
Long Threaded Pipe (H)
Hex Nut (I) Hex Nut-a (J)
Metal Pad (K)
Decorative Cup (L)
Finial (M)