Installation Sheet

150624

Turn on the power at fuse or circuit box

Lock Nut (H)

Washer (I)

Threaded pipe (J)

Short Mounting

Screw (B)

Green Grounding

Screw (C)

Wire Nut (E)

Mounting Strap (A)

Long

Screw (D)

Metal Pad (K)

Decorative Cup (G)

Finial (F)

4. Attach the ceiling pan to the mounting strap by inserting two long screw heads into the key holes, and then rotate

the ceiling pan until it locks in place, finally secure the screws tightly. (See Fig.1)

5. Screw the threaded pipe into the coupling, and then secure it with a washer and a lock nut.

NOTE:Depth of threaded pipe may need to be adjusted to properly fit glass shade, decorative cup and finial.

6. Install bulbs (not included). Check relamping label at socket area or packaging for maximum allowed wattage.

7. Attach the glass shade to the ceiling pan by inserting the threaded pipe, and then secure it with a metal pad and a

lock nut.

8. Slip the decorative cup up through the threaded pipe, secure it with the finial.

The following parts are available for re-order if damaged or missing.

Spare Parts List:

A: 15-1/2"

B: 6-1/2"

Glass Shade

9726EW(1PC)

Assembly Kit

5382MM (1 SET) FOR C0100

5383MM (1 SET) FOR C0101