Installation Sheet

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
C0068
Bulb Type B Max.60W
(not included)
Mounting Screw (B)
Green Grounding Screw (C)
Wire Nut (E)
Parts:
140106
Parts Number (4943MM)
Mounting Screw (B)
Green Grounding
Screw (C)
Hex Nut (F)
Wire Nut (E)
Mounting Strap (A)
Finial (H)
Washer (G)
House Grounding Wire
Fixture Grounding Wire
Outlet Box
Fixture Wire
Fixture
Nipple (D)
Nipple (D)
Mounting Strap (A)
Hex Nut (F)
Washer (G)
Finial (H)
1. Attach the nipple to the mounting
strap, then secure it with a washer
and hex nut.
2. Attach the mounting strap to the
outlet box by using two mounting
screws.
3. Pull out the outlet wires and the
house grounding wire from the
outlet box. Make wire connections
by using the wire nuts:
---Connect the black wire from
the fixture to the black wire
from the power source.
---Connect the white wire from the
fixture to the white wire from the power source.
---Attach the fixture grounding wire to the mounting plate with the green grounding screw. Then
connect it to the house grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
4. Attach the fixture to the mounting strap by inserting the nipple, then secure it with a finial.
5. Install bulbs (not included). See relamping label at socket area or packaging for maximum allowed
wattage.
6. Turn on the power at the main fuse or circuit breaker box.