Owner`s manual

4.9.3 Step 3, Boot from the Target Node
The third step in Ethernet booting is to issue the BOOT
command from the target node.
Example 4–6: Step 3, Booting from the Target Node
>>> BOOT /XMI:E EX0 ! Enter BOOT command
Initializing system
#123456789 0123456789 0123456789 0123456789 012345#
F E D C B A 9 8 7 6 5 4 3 2 1 0 NODE #
AA...MMMM..PPP TYP
++...++++..+++ STF
...........EEB BPD
...........+++ ETF
...........EEB BPD
.....A4A3A2A1..... ILV
.....64646464..... 256Mb
Console = V1.00 RBDs = V1.00 EEPROM = 1.00/1.00 SN = SG01234567
Loading system software
* Initializing adapter
* Specified adapter initialized successfully
* "Request Program" MOP message sent - waiting for service from remote node
* Remote service link established
* Reading boot image from remote node
* Passing control to transfer address
[operating system banner appears]
4–26 VAX 6000 Series Owner’s Manual