Owner`s manual

Example 4–2 (Cont.): Sample Ethernet-Based CD Server Boot
* Initializing adapter
* Specified boot adapter initialized successfully
* "Request Program" MOP message sent - waiting for service from remote node
* Remote service link established
* Reading boot image from remote node
* Passing control to transfer address
SHOW CONFIGURATION displays the positions of the modules. The
DEMNA is located at XMI node E. Enter this value E in the BOOT
command as the argument to the /XMI qualifier.
In the boot command, the /FILENAME qualifier is used to request a file
that will be loaded into system memory from the remote CD server. In
this example the file ISL_LVAX_A is the argument to the /FILENAME
qualifier.
EX0 specifies the DEMNA adapter as the boot device.
System runs self-test (see Chapter 6 for a description of the self-test
display).
Boot status messages are displayed (see Appendix J for the boot status
and error messages displayed by Model 500 and 600 systems).
Booting 4–17